Dagenham Plumbers (RM8), Plumbing in Dagenham, Plumber (RM8, RM9, RM10), No Call Out Charge, 24 Hour Plumbers Dagenham (RM8, RM9, RM10)

Blog

HOW_RADIATOR_REPOSITIONING_IS_DONE

Radiation is a term used to describe transfer of heat energy from one medium to another which can take place even in vacuum. In other words, it turns out that radiation does not require a third medium for it to operate. Moreover, radiators were built initially to cool down a system of fluids by taking their heat and emitting it to the surrounding. Radiators pass through a heat source, usually water, which radiates heat to surrounding air. Air when heated rises up and is replaced by new air and the process continues, eventually warming the entire room. This process is also known as convection.We aim to make your life easy by doing it for you at Plumbers Dagenham. Heres what we would like you to know before you take any decision. Why repositioning of radiator is tricky?Radiator has a lot of dangerous parts like the fluid and pipes.The fluid.The coolant fluid is the most important component of a radiator and is also the most dangerous. It can cause heat burns if you are too careless with a radiator.The pipes.As such the pipes are not dangerous and are mostly kept at a place which is inaccessible but when repositioning you will need to cut these pipes and expose the dangerous parts.The equipment you will be using like soldering and cutting tools also pose danger to you.How to carry out a radiator repositioning?Choose your new location for the radiator wisely as this will decide how much will be your expenditure.Depending on your new location, you will either be required to move your furniture if in the same room or empty your apartment if you plan to shift to an entirely new room.Let the radiator cool and then drain the fluids by removing the drain cap.Expose the pipes completely and cut the pipes carefully to disjoint the radiator and boiler pipes.Move your radiator to the new location and mark your points with a marker on the wall or floor where you intend to put it.Dig holes for the pipes and reposition at your chosen place. Solder back the pipes to the valves.Clean up the place and you are ready to be cozy again.Be careful and alert through the entire process and you should master the repositioning of radiators. Take note of safety measures. We, at Plumbers Dagenham, can do all this for you. Give us a call and we will come and have a look at your radiator and/or guide you to the process.

Leave a Reply

Your email address will not be published. Required fields are marked *